Resolves missing info on control page when users hit play before letting calculation finish. Added popup during calculation to stop the user from sending inputs during calculation.You will also need to do step 2 and reset the configuration after installing this update.
* If you’ve already been running 1.0.6 beta, you will still need to perform this update via USB (it will not come over the network).
If you haven’t yet, expand the storage (optional but recommended): How To Expand The Raspberry Pi File System Here’s a walk through on how to reset with pictures How To Reset The Configuration To Defaults Reinput any stall homing, probe or pwm/spindle settings that you had before resetting. Once reset, the values for both will change. Choose your appropriate machine, and hit ok.
Go to the fly out menu, general, under configuration click ‘reset’. If you’ve made any changes to stall homing, probe dimensions, or pwm/spindle, you’ll need to write those down to reinput later as resetting the configuration will change those values back to default.
Once the firmware is installed, to get the max-velocity settings to apply, you’ll need to reset the configuration. If you already have 1.0.5 and are connected to the internet and do NOT have auto updates enabled, go to Click the flyout menu (three bars on top left), general, and under firmware click upgrade. If you already have 1.0.5 and are connected to the internet and have auto updates on, a pop up will inform you that there is an update and the machine will update automatically via the internet.
Depending on your shipping date, the password to update will either be buildbotics or onefinity Click the flyout menu (three bars on top left), general, under firmware click ‘UPLOAD’. bz2 file below onto a usb stick (it must be formatted as fat 32 or ntsf). You’ll do an update via USB using the following steps:Ĭopy the blue. If you were on the beta before this, try flashing back to 1.0.5, restarting, then flash to the 1.0.6. 1.0.7 beta is the current release.ġ.0.6 is the third firmware update for the Onefinity CNC Controller. We’ve taken it down and will be skipping this release. If you are still having issues after exchanging the Compact Flash, please contact AXYZ Customer Service to get a service ticket to talk to our Technical Support Department.*We found one bug that snuck by us in this release. If the A2MC does boot, but the machine does not boot up properly, please try plugging in, with the power off, the spare compact flash that was sent with your machine when new.
If you press the reset button and the machine boots up, it should reset itself with no further issues. Please contact AXYZ Customer Service for an RMA so that the unit can be returned for repair, please provide a detailed explanation of the issue. If you press the reset button twice and still no activity, it indicates a hardware problem and the unit will have to be returned for repair. If you do not have a reset button and you have plugged in a monitor and see no activity, the unit will have to be returned to AXYZ for repair. Most Revision 4 A2MC’s have a reset button mounted on the top right corner of the A2MC, press the reset button to see if the unit will reboot. If it does NOT beep, there is a problem with the A2MC booting. You should get a loud beep from the A2MC which indicates the BIOS has booted. First thing you should attempt is to open the electronic box and turn on the machine.